2007 hyundai santa fe key fob programming

Any time that you replace the battery in your Hyundai keyless remote, you will need to reprogram the system to match your car. You'll need to follow several steps to ensure that your Hyundai keyless remote system is programmed correctly. The process is relatively simple, and you'll be able to access all the remote system's critical features once it has been reprogrammed to your car again.

How To Program Your Hyundai Keyless Remote System

The first step to take in reprogramming your Hyundai keyless remote system is entering the vehicle and closing all the doors. Second, use your key to switch on the "ACC" accessory function on the Hyundai's ignition system. Third, you will notice a button on the key fob that says either "unlock" or "open." Hold this button down on the key fob for several seconds. When the programming is complete, a light will start flashing on your car to let you know that the programming was a success.

Opening the Key Fob

If your key fob needs to be reprogrammed, the most likely cause is a dead battery. Retrieving the battery for replacement is a process that may vary slightly depending on the Hyundai model that you drive, as the key fobs have different designs based on model year. Most key fobs will have an indentation or a notch somewhere along the side that can be easily opened with a screwdriver. After opening the critical fob, look for a circuit board, which exposes the battery when you lift it. The battery will have a specific number that indicates the type of battery your Hyundai's key fob uses. Most key fobs use the battery numbered "CR2032." If the battery needs replacement, let the helpful staff at our dealership know, and they'll help you find a suitable replacement part.

Tips

Keep in mind that the key fob programming instructions will only work if you have a key fob already programmed to a previous Hyundai that you owned. If you are purchasing a new Hyundai, you will need to visit a Hyundai service center to have an expert technician program the key fob to your vehicle instead.

Reprogramming your Hyundai's key fob is relatively simple, but the experts at our dealership are always here to assist if you have questions or need help. Contact us today with your questions about programming the key fob on your Hyundai, and a professional service team member will gladly assist.

Jerry partners with more than 50 insurance companies, but our content is independently researched, written, and fact-checked by our team of editors and agents. We aren’t paid for reviews or other content.

We strive to provide convenience to our customers with free keyless entry remote fob programming instructions for every single vehicle that we sell on NorthCoast Keyless.

Many people don’t know that they can purchase their own replacement vehicle entry remote, save up to 70% off of marked up Dealership prices, and program the replacement remote to their vehicle themselves. We know how good it feels to save money and do something yourself; and we aim to make it as painless as possible for you!

Free Key Fob Remote Programming Instructions for a 2007 Hyundai Santa Fe

SORRY, THERE ARE NO KEYLESS ENTRY REMOTE SELF-PROGRAMMING INSTRUCTIONS FOR THIS VEHICLE. 

• The Manufacturer decided to not produce this vehicle with self-programming capabilities.
• You must get an Automotive Locksmith to program the remote to your vehicle for you.
• If your vehicle requires professional programming we tell you, so you’re not left with any doubt and searching all over the internet.
• It’s still much cheaper to purchase a remote from NorthCoast Keyless and get it programmed by a Locksmith rather than buying from a Dealership!
• We strongly recommend calling a Local Auto Locksmith for help here.
• Find a Local Automotive Locksmith instantly by using our search tool below:

Find a Local Auto Locksmith

Custom Search

If you have any difficulties with programming your vehicles, contact us at [email protected].

Out of stock

Hyundai

2006-2012 Hyundai Santa Fe 3-Button Key Fob Remote (FCC: PINHA-T038, P/N: 95411-0W100, 95411-0W110, 95411-0W120)

Rated 5.00 out of 5

Dealership: $200.00

Why NorthCoast?

MONEY BACK GUARANTEE

We offer a No Questions Asked Money Back Guarantee on all of our products!If you can’t get it to work for your vehicle–reach out!We’ll get you your money back.

FAST & FREE SHIPPING

ALWAYS! First Class USPS shipping is always shipped for free for all Domestic (US) customers in less than ONE business day. No ifs, ands, or buts!

CUSTOMER SUPPORT

Have a question for us? Reach out! We're here for you. We will work with you to solve your issue rather than just having you return an item without a solution like some of the big box online stores do.

SAVE 70% OVER DEALERSHIPS

We’ve worked hard to create a network of reliable and reasonably priced suppliers that allow us to give you rock bottom prices.You're also not paying for huge fancy offices or sports cars for our Owners. We always will be just regular people tryin’ to make a livin’ not a killin’!

Can I program my own Hyundai key fob?

If you are purchasing a new Hyundai, you will need to visit a Hyundai service center to have an expert technician program the key fob to your vehicle instead. Reprogramming your Hyundai's key fob is relatively simple, but the experts at our dealership are always here to assist if you have questions or need help.

Does a 2007 Hyundai Santa Fe have a chip in the key?

This key contains an embedded micro-chip called a transponder. Each transponder has its own unique code--it's the key's 'fingerprint'.

How do you program a key fob for a 2006 Hyundai Santa Fe?

Obtain all remote transmitters for this vehicle..

Remove the plate covering the alarm system control under the steering column, turn memory switch to the Off position. ... .

Insert key into the ignition and turn it to the On position. ... .

Press lock on the remote being programming and on all additional remotes..

How do you program a replacement Hyundai key fob?

How to Program a Hyundai Key Fob.

Get inside of your Hyundai and ensure all the doors are closed..

Use your key to turn your Hyundai to the “ACC” (accessory) position on your ignition..

Hold the “open” or “unlock” button on the key fob until your vehicle's light flashes..

Congratulations!.