2015 mazda cx 5 alternator replacement

We're offline for a tune-up, we'll be up and running smoothly very soon.

Table of Contents Show

How long does an alternator last on a Mazda CX
How much does it cost to replace a Mazda alternator?
Can you replace an alternator yourself?
Does a Mazda CX

In the meantime, here are some other options available:

Visit an
Advance Auto Parts store

View us on Social Media
Facebook/Twitter/Blog

We appreciate your patience – for your next visit:

15% off

your next purchase.
Some exclusions apply.

Enter coupon code: in shopping cart.

We look forward to serving you,
The Advance Team

WARNING:

Remove and install all parts when the engine is cold, otherwise they can cause severe burns or serious injury.

When the battery cables are connected, touching the vehicle body with generator terminal B will generate sparks. This can cause personal injury, fire, and damage to the electrical components. Always disconnect the negative battery cable before performing the following operation.

1. Disconnect the negative battery cable..

2. Remove the front under cover No.2..

3. Remove the generator drive belt..

4. Remove the A/C compressor with the cooler hose still connected and secure it using wire or rope so that it is out of the way..

5. Remove in the order indicated in the table.

6. Install in the reverse order of removal.

1	Drive belt auto tensioner (See Drive Belt Auto Tensioner Installation Note.)
2	Terminal B cable
3	Generator connector
4	Generator (See Generator Removal Note.) (See Generator Installation Note.)

Generator Removal Note

1. Fully loosen the generator lower bolt and pull it outward until it contacts the body frame.

NOTE:

The generator can be removed without fully removing the lower bolt from the engine.

2. Remove the generator upper bolt.

3. Remove the generator together with the lower bolt from the engine.

4. Remove the generator from above the engine compartment.

Generator Installation Note

1. To facilitate the installation of the generator to the engine, grasp the spacer in the bolt installation hole using pliers and push it down to the nut side.

2. Temporarily install the generator to the engine with the bolt C.

3. Align the generator fixing hole with the engine side hole, then temporarily tighten the generator installation bolt B.

4. Securely tighten the generator installation bolts in the order of B, C.

Drive Belt Auto Tensioner Installation Note

CAUTION:

To allow the drive belt auto tensioner to function correctly, always bleed the air from the drive belt auto tensioner using the following procedure after assembling the drive belt auto tensioner.

1. Install the drive belt auto tensioner to the engine.

CAUTION:

To prevent damage to the drive belt auto tensioner, do not apply excessive torque after the tensioner moves full-stroke.

2. Insert the wrench into the cast hexagon on the drive belt auto tensioner, move the drive belt auto tensioner up and down at full-stroke three times to bleed the air.

NOTE:

By moving the drive belt auto tensioner up and down full-stroke three times, the piston inside the tensioner moves to bleed the air.

Generator Inspection [Skyactiv G 2.0]

CAUTION: Do not apply direct battery positive voltage to generator terminal D, otherwise it could cause damage to the internal parts (power transistor) of the generator. Charging syst ...

Generator [Skyactiv G 2.0]

Purpose, Function The generator operates by obtaining drive force from the engine via the drive belt and generates the required electricity for electronic devices. Construction ...

Other materials:

Auto Dimming Mirror Inspection
1. Measure the voltage at each terminal. If the voltage is not as specified in the Terminal Voltage Table (Reference), inspect the parts under “Inspection item (s)” and related wiring harnesses. If the system does not work properly even though the inspection items or ...

Rear Seat Cushion Trim Removal/Installation
CAUTION: When removing or putting in the rear seat cushion, contact with the surrounding areas of the vehicle could cause scratches and damage. When removing or putting in the rear seat cushion, always use two or more persons to perform the work and be careful not to scratch or dama ...

Wheel Apron Component Installation [Panel Replacement]
Symbol Mark Installation Procedure 1. When installing new parts, measure and adjust the body as necessary to conform with standard dimensions. 2. Drill holes for the plug welding before installing the new parts. 3. After temporarily installing new parts, make sure the related parts fit p ...

How long does an alternator last on a Mazda CX

The alternator works about as hard as any part of your car, so eventually, it is bound to fizzle out. The average longevity of an alternator is seven years or about 150,000 miles.

How much does it cost to replace a Mazda alternator?

The average cost for a Mazda 3 alternator replacement is between $602 and $749. Labor costs are estimated between $121 and $153 while parts are priced between $481 and $596. This range does not include taxes and fees, and does not factor in your specific model year or unique location.

Can you replace an alternator yourself?

In general, it will take about two hours for you to replace an alternator on your own, though this could vary somewhat depending on your knowledge of car mechanics. If you take your car into a shop in order to have the alternator replaced, timing may vary somewhat, and you may have to leave the car for the day.

Does a Mazda CX

Your Mazda CX-5 will be happy to know that the search for the right Alternator products you've been looking for is over! Advance Auto Parts has 5 different Alternator for your vehicle, ready for shipping or in-store pick up. The best part is, our Mazda CX-5 Alternator products start from as little as $252.99.

mazda cx alternator replacement