America's Leading Manufacturer of Innovative Water-Based Wood Finishes
Yes! But you must follow ONE simple rule to ensure the best possible finish: the underlying finish must be absolutely dry.
- When using a water-based product over an oil-based product, such as water-based High Performance Topcoat over oil-based Gel Stain, wait 72 hours before applying the water-based product.
- When using an oil-based product over a water-based product, such as oil-based Arm-R-Seal Topcoat over Water Based Wood Stain, wait 24 hours before applying the oil-based product.
OTHER RULES TO REMEMBER
- You cannot mix water- and oil-based products together.
- General Finishes original Enduro-Var can only be used over raw wood or General Finishes water-based wood stains or dye stains. Original Enduro-Var cannot be used with any oil-based product, sanding sealer or shellac. Enduro-Var II (new formula) is compatible with all GF products and can be used over shellac.
- Oil-based finishes amber over time; do not use them over white or very light colors.
VIDEO: Can oil and water based products be used over one another?
Related Products
Relevant Videos
*My posts may contain affiliate links, which means I may receive a small commission, at no cost to you, if you make a purchase through a link! Thank you for supporting my website!*
Last updated on October 28th, 2022 at 03:55 pm
Can You Put Oil-Based Polyurethane Over Water-Based Paint? Find Out Here!
Wondering if you can use an oil-based polyurethane over a water-based paint? Well, look no further because I have your answer!
Oil-based polyurethane can be applied over water-based paint as long as the paint has dried fully (at least 24 hours). If the paint creates a good powder while lightly sanded then it is dry and ready for a top coat.
Now that we’ve got the basics out of the way, let’s break into the details further so you can get the best polyurethane finish on your painted project.
Let’s dive in!
- What Happens When You Apply Oil-Based Polyurethane Over Water-Based Paint
- Should You Use Oil-Based Polyurethane Over Water-Based Paint?
- Advantages & Disadvantages Of Using Oil-Based Polyurethane Over Water-Based Paint
- How To Apply Oil-Based Polyurethane Over Water-Based Paint
- Top Tips When Applying Oil-Based Polyurethane
- Other FAQs About Oil-Based Polyurethane & Water-Based Paint
- Final Thoughts
- Related Polyurethane Articles
What Happens When You Apply Oil-Based Polyurethane Over Water-Based Paint
If water-based paint has not fully dried before applying an oil-based polyurethane, then the oil will have a hard time sticking to the water.
This can result in the polyurethane peeling off of the paint and not curing properly.
However, if the paint has had at least 24 hours to dry and creates a good layer of powder when lightly sanded with 320-grit sandpaper, then it is fully dry.
In this case, the oil-based polyurethane will have no problem adhering to the dried paint.
This video does an excellent job of demonstrating how oil- and water-based products can be used over one another.
Should You Use Oil-Based Polyurethane Over Water-Based Paint?
In general, oil-based polyurethane is much more durable than water-based.
So if you are painting a tabletop or highly used piece of furniture or cabinets, then you will want to use oil-based polyurethane.
This will provide the best protection for your newly painted piece.
The only time you do not want to use oil-based polyurethane over paint is if you are using white paint.
Oil-based polyurethane has a natural amber tint to it. When it is applied over white paint, it will turn the paint color yellow.
Check out my article about fixing yellowing topcoats if this has already happened to your painted project.
If you are using white paint, then using a water-based polyurethane such as MinWax’s Polycrylic found at Amazon will help your white paint stay looking white.
Water-based polyurethanes have a little tint to them, but they are more blue-tinted than yellow-tinted. This helps the white paint retain its whiteness.
Related Polyurethane Articles
- How To Get Rid Of Bubbles In Dried Polyurethane (And Other Common Polyurethane Mistakes)
- Applying Water-Based Polyurethane Over Oil-Based Stain: What Happens?
- How Long To Let Paint Dry Before Applying Polyurethane (Water-Based vs Oil-Based)
Advantages & Disadvantages Of Using Oil-Based Polyurethane Over Water-Based Paint
Whether you are using polyurethane over water- or oil-based paint, there are several advantages and disadvantages to doing so.
Creates a more durable, scratch and abrasion-resistant surface | Takes longer to dry (about twice as long as water-based polyurethane) |
Longer dry times help it to self-level and minimize brushstrokes left behind | Has an amber tint to it – It can alter the paint color in a way that water-based polyurethane doesn’t (turns it more yellow) |
Creates a thicker shell with fewer coatings than the water-based option making it more cost-effective | Harder to clean up – Mineral spirits are needed when clean-up is required, emitting additional chemical fumes in the working area |
Surface remains sticky until fully cured – Dust can settle on the sticky surface, and insects can find themselves stuck to the surface, resulting in extra time spent cleaning them away | |
Emits strong chemical odors that disappear upon curing – Ensure the working area is constantly ventilated and use masks or respirators whenever necessary |
How To Apply Oil-Based Polyurethane Over Water-Based Paint
Applying oil-based polyurethane over water-based paint is a fairly straightforward process.
- Give the water-based paint enough time to dry completely. The paint needs at least 24 hours to dry before the polyurethane can be applied.
- Lightly sand the painted surface with 320-grit sandpaper making sure not to remove any paint.
- After buffing or sanding, use clean microfiber rags to remove any dust
- Wipe down the sanded surface with mineral spirits to remove any remaining dust. (Check out my other article here to see how big of a difference it makes doing this one extra step while cleaning sanded wood)
- Use a foam brush to apply a thin layer of oil-based polyurethane.
- After the first coat has dried fully, lightly sand away any blemishes with 320-grit sandpaper and remove the dust before applying the second coat of polyurethane.
- Repeat step 6 and apply the final coat of polyurethane.
Final Thoughts On Putting Oil-Based Polyurethane Over Water-Based Paint
There you have it!
While it’s normally recommended to use water-based products over water-based and oil-based over oil, you can mix and match them without much consequence.
And sometimes, it’s better to mix and match them because oil-based is always more durable.
All that’s required is that you let the first coat dry completely before applying the opposite top coat. Then you are good to go.
Catch you in my next post!
- How To Get Rid Of Bubbles In Dried Polyurethane (And Other Common Polyurethane Mistakes)
- Applying Water-Based Polyurethane Over Oil-Based Stain: What Happens?
- How Long To Let Paint Dry Before Applying Polyurethane (Water-Based vs Oil-Based)
Applying Oil-Based Polyurethane Over Water-Based Paint: What Happens?
DIY With Christine is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com.