How to reset oil life on 2007 honda pilot

Reset oil service light Honda Pilot. From years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012.

How do you reset oil service light Honda Pilot. From years: 2003, 2004, 2005.

1. Turn off the engine. Press and hold the SELECT/RESET button in the instrument panel and turn the ignition switch to run (one position before starting).
2. Hold the button for at least 10 seconds, until the indicator resets.
3. Turn the ignition off and then start the engine to verify the indicator has been reset.

How to reset oil service light Honda Pilot. From years: 2006, 2007, 2008, 2009, 2010, 2011, 2012.

Resetting the Engine Oil Life Display if maintenance service is done by someone other than your dealer, reset the maintenance minder as
follows:

1. Turn the ignition switch to the ON (II) position.
2. Press the select/reset knob repeatedly until the engine oil life is displayed.
3. Press the select/reset knob for about 10 seconds. The engine oil life and the maintenance item code(s) will blink.
4. Press the select/reset knob for another 5 seconds. The maintenance item code(s) will disappear, and the engine oil life will reset to 100.

All information is taken from the Honda Pilot owners manual.

That it is the full procedure how to reset oil service light Honda Pilot. If you like to reset any maintenance oil light after an oil change. Or reset check engine light, airbag light, inspection key or insp errors when maint reqd, for Honda cars. Or any warning light for service reminder which appears on the display. Write in the search box the car name for which you want to find information, and find how to reset other service reminders when by yourself.

 This is an information site where you can solve your car problems. Send us a comment if our procedures are correctly. If you would have anything to add, for us every opinion counts.

Click hear to see full procedure how do you reset the oil light indicator. How to reset the maintenance light and how do you reset service light for all Honda vehicles.

Tips

How To Reset The Oil Life Indicator Of Your 2003-2008 Honda Pilot After Oil Change

Do you have a 2003-2008 Honda Pilot and have been looking for a way to reset the oil life indicator light on your dashboard to 100% after oil change? You’re right on track. We will give you a step-by-step guide on how to get it done immediately.

Below is the step by step instruction on how to reset your oil life indicator on a 2003-2008 Honda Pilot.

• Insert your key into the ignition, and turn it to the “On” position but do not start the engine.
• Press the “SEL” button on the steering column control panel until the words “Oil Life” appear on the odometer.
• Press and hold the “SEL” button for approximately 10 seconds or until the “Oil Life” display begins to blink. Release the button when the display blinks.
• Press and hold the “SEL” button for five seconds until the display flashes and the “Oil Life” display resets to 100 percent.

Below is a video for the purpose of clarity;

• See Also: How To Reset The Oil Life Indicator Of Your 2007-2012 Honda CRV After Oil Change

Emeka is a Contributor at Autojosh. A graduate of Electrical/Electronic Engineering with a B.Eng degree. Emeka is a car enthusiast who is interested in traveling, writing, movies and driving. He also loves drinking garri with cold water.

Trending