How to turn off maintenance light on toyota corolla 2007

Undo your battery for a couple of minutes. This worked on the older models. I believe this is the procedure for yours.

Table of Contents Show

How To Reset Maintenance Required Light In 2003-2007 Toyota Corolla After Oil Change
See Also: How To Reset Maintenance Required Light In 2009-2015 Toyota Venza After Oil Change
For more context, watch the video below;
See Also: How To Reset Maintenance Required Light In 2008-2013 Toyota Corolla After Oil Change
More Articles
How do you turn off the maintenance required light on a 2007 Toyota?
How do you turn off maintenance light on Toyota Corolla?
What does the maintenance required light mean on a 2007 Toyota Corolla?

Turn the ignition key to 'ON' and press the odometer button until the display reads ODO (not Trip A or B).

Turn the ignition key to OFF.

Hold in the same button you used in step 1.

While holding the button in, turn the ignition key to ON.

The ODOMETER will change to:

5 dashes - - - - -

Then 4 dashes - - - -

Then 3 dashes - - -

Then 2 dashes - -

Then 1 dash -

THEN all zeros 0 0 0 0 0

Then back to the correct mileage.

Then the Maintenance Required light should blink and go out.

2007

http://www.ehow.com/how_6400319_reset-co...

http://wiki.answers.com/Q/How_do_you_res...

2005

http://wiki.answers.com/Q/How_do_you_res...

Tips

How To Reset Maintenance Required Light In 2003-2007 Toyota Corolla After Oil Change

This article shows you the steps for resetting the maintenance required light on the dashboard of Toyota Corolla. The procedure is same for Ninth generation Toyota Corolla (2003 – 2007).

The Toyota Corolla’s ‘maint reqd’ light simply means a service interval has been met. And this means engine oil is due for change. It comes on 5,000 miles after the last time it was reset.

This light comes on strictly as a function of those miles; it has no way of knowing whether your oil has or hasn’t been changed in the interim, and it never, ever is an indication of something being wrong. So your heart doesn’t skip a bit whenever it pops up on your dashboard.

See Also: How To Reset Maintenance Required Light In 2009-2015 Toyota Venza After Oil Change

Below are the steps you should follow to reset the maintenance required light in your 2003 – 2007 Toyota Corolla.

Turn the ignition key to ‘ON’ and press the odometer button until the display reads ODO (not Trip A or B).
Turn the ignition key to OFF.
Hold in the same button you used in step 1.
While holding the button in, turn the ignition key to ON
The ODOMETER will change from 5 dashes to 1 dash and then woulkd change to all zeros and then back to the correct mileage.
Then the Maintenance Required light should blink and go out.

For more context, watch the video below;

See Also: How To Reset Maintenance Required Light In 2008-2013 Toyota Corolla After Oil Change

Emeka is a Contributor at Autojosh. A graduate of Electrical/Electronic Engineering with a B.Eng degree. Emeka is a car enthusiast who is interested in traveling, writing, movies and driving. He also loves drinking garri with cold water.

1. Turn the ignition to run (one position before starting engine).
2. Ensure odometer reading is shown. Turn ignition off.
3. While holding down the trip meter reset knob turn the ignition to run (one position before starting engine).
4. Hold down knob for at least 5 seconds. The odometer indicates "000000" and the light goes off. If the system fails to reset, the light will continue flashing.
5. Turn the ignition off and then start the engine to verify the indicator has been reset.

Comments are closed.

Comstock/Comstock/Getty Images

The 2007 Toyota Corolla features a "maintenance required" light that comes on when it is time to change the oil and filter. The light trips based on miles driven since it was last reset. If you change your own oil, or if the service mechanic forgets to reset the light, you will need to reset it yourself. This is a simple task that most drivers should be able to accomplish in about five minutes.

Step 1

Insert the key into the ignition and turn it forward to the "on" position, which is one click before the ignition cranks the engine.

Step 2

Locate the trip selector button on the instrument panel. Press it until the display reads "ODO."

Step 3

Press and hold the trip selector button.

Step 4

Turn the ignition off without removing the key. Turn the key back to the "on" position while continuing to hold in the trip selector button.

Step 5

Wait for the odometer to cycle through. It will display a series of zeros, then a series of dashes. As it cycles, the line of dashes will become shorter and disappear. When there are no more dashes, release the trip selector button. The "maintenance required" light will go out.

Step 6

Turn the ignition off and remove the key.

References

"2007 Toyota Corolla Owners Manual;" Toyota Motor Corporation; 2007

Things You'll Need

Ignition key

Writer Bio

Owen Pearson is a freelance writer who began writing professionally in 2001, focusing on nutritional and health topics. After selling abstract art online for five years, Pearson published a nonfiction book detailing the process of building a successful online art business. Pearson obtained a bachelor's degree in art from the University of Rio Grande in 1997.

How do you turn off the maintenance required light on a 2007 Toyota?

Quickly push and hold the odometer button on your dashboard, then turn your key to position two. Continue to hold the odometer button for about 10 seconds. The maintenance light should start to flash, and you may hear a beeping sound. Then the light should go out.

How do you turn off maintenance light on Toyota Corolla?

Turn Off Maintenance Light: Toyota Corolla - Trip Reset Button.

Place your key in the ignition, and turn it to the "On" position. ... .

Press and hold the trip reset button. ... .

Once these words display, return the key to the "Off" position..

While holding the trip reset button down, turn the key back to the "On" position..

What does the maintenance required light mean on a 2007 Toyota Corolla?

The procedure is same for Ninth generation Toyota Corolla (2003 – 2007). The Toyota Corolla's 'maint reqd' light simply means a service interval has been met. And this means engine oil is due for change. It comes on 5,000 miles after the last time it was reset.