If you are experiencing incorrect or inconsistent battery level, quick battery discharge, slow or erratic charging speeds, or sudden power off or rebooting, a battery calibration could correct the problem.
To perform a battery calibration:
- Force reboot the device by holding the power button until the device reboots
- Plug into supplied charger
- Charge to 100% and leave on the charger for at least an additional hour after getting to 100%
If you have performed these steps and you are still experiencing battery or charging issues you can visit our troubleshooting page, or submit your device for repair.
Was this answer helpful?
How do you fix plugged in can’t charge right now?
Here are a number of fixes to try if your Android phone is not charging.
- Reboot Your Phone.
- Try Putting Your Phone in Safe Mode.
- Switch to a Different Cable/Socket/Adapter.
- Make Sure It’s Not a Software Bug.
- Clean the Charging Port.
- Could Your Phone Have Water Damage?
- Visit a Service Center.
Can’t charge right now?
Re:Plugged in, can’t charge right now
Try Settings> Apps and Info> Phone> Storage and clear Data and Cache. Then long press the power button until the the phone restarts. For those who are curious, this is the new Android equivalent of removing the battery.
Why does my battery say Plugged in not charging?
The “Plugged In, Not Charging” status you see when you mouse over the battery icon in the Windows taskbar indicates that the AC adapter is plugged in to run the computer, but the battery isn’t charging.
Why is my laptop plugged in and not charging?
Remove Battery
If your laptop is actually plugged in and yet it is still not charging, the battery might be the culprit. If so, learn about its integrity. If it’s removable, take it out and press (and hold down) the power button for around 15 seconds. What this will do is drain the remaining power from your laptop.
Google Fi Help
Sign in
Google Help
- Help Center
- Community
- Google Fi
- Privacy Policy
- Terms of Service
- Submit feedback
Send feedback on...
This help content & information
General Help Center experience
- Help Center
- Community
Google Fi
Motorola's most recent Moto X, released in August 2017.
When I plug in my Moto X4 the charging light will not turn on and the indicator on the screen does not show that it is charging
When plugged in, the Moto X4 will take a few seconds before it starts charging. If the battery was completely emptied, the Moto X4 may take a few minutes before the device starts charging.
Check the charging cable to make sure it is not frayed. If the cable is cut or disconnected, it might be possible to solder the connection back together and insulate the soldering job with the proper heat shrink. Otherwise, look at finding another Moto X4 Turbocharger.
Make sure the charging cable is completely plugged in all the way. Also be sure to check that the charger is the original charger that came with your Moto X4, as some chargers may be too weak to even charge the Moto X4.
Screen does not register inputs
Locate the power button on the right side of the Moto X4. Press and hold it down for 3 seconds until you have the option to power off the device, then turn it off. Let it set for a minute then restart it.
Clean your hands and dry them thoroughly before touching the device. Then check the screen for any foreign material and wipe it down with a microfiber cloth.
Dropping this device or water getting into the phone from previous repairs can damage the screen. If display assembly is damaged, it will have to be replaced. Refer to our display assembly replacement guide.
When audio is played or phone rings, MotoX4 does not reach volume level set by user
Turn up or down the volume using the uppermost two buttons located on the right side on the phone. The buttons turn up or down the volume respectively.
While running an application, only the actual volume may be adjusted and not the ringer. Go back to homescreen in order to adjust the ringer audio volume.
Make sure there is an obstruction in the ear speaker first because speaker can become more damaged if this is not the case. Use tweezers to pull out if the obstruction is lint or something larger. Use compressed air to blow out any dirt or dust.
The power button is unresponsive and the device will not show any sign of powering on.
Locate the charging port on the bottom of the phone . Plug in the phone using the original charger that it came with. After plugging it in, make sure the indicator light turns on and let the phone charge until it can be powered on.
If plugging in the phone has no effect on the battery, it may need to be replaced. Refer to our replacement guide
If the device has been left out in the sun for a while, it may have overheated. Place the phone in a cool area and let it set for several minutes before attempting to turn it on again.
Device will not connect to wifi and/ or bluetooth
If your device has not booted properly, try restarting the device. To hard restart the device, plug in your Moto X4 and hold down the power button for 10-20 seconds. If this does not restart the device, try holding down the power button and the volume down button at the same time for 30-40 seconds.
Go into the Wi-Fi settings of the device and tap “Forget Network” on your network. Restart your router and reconnect to the same network again.
Verify bluetooth device is working using another device. Most of the bluetooth issues occur from compatibility issues. Check to ensure both devices are compatible with each other. Try a soft reset of the device, turn off and on the bluetooth device and then remove pairing and reconnect completely.